UC-400KU 400W HPA - Download spec sheets

Covering the need for a high powered amplifier above SSPA’s cost effectiveness, Upcom Technologies' has released a line Travelling Wave Tube amplifiers.

It based on time and field proven TWT and modular power supply technologies allowing for superior reliability and ease of field serviceability.

  • COST EFFECTIVE HIGH POWER
  • UNVIVERSAL POWER INPUT
  • FRONT PANEL CONTROL
  • BUILT-IN REDUNDANCY SWITCHING
  • MODULAR POWER SUPPLY DESIGN
  • 2 YEAR WARRANTY!
Frequency Range:
13.75 to 14.50 GHz
(other frequencies available)
Harmonic Output:
-60dBc
Control:
User Panel, RS-422/RS-485
Ouput Power at the Flange:
375W, typical 350W, min.
Residual AM:
-50dBc to 4kHz max. 4kHz to 500 kHz -20 (1.15 + logF) (F in kHz) max.
-85dBc above 500 kHz
Altitude:
Up to 10,000 ft ( derate 2ºC/1,000ft.
above 3000ft)
Intermod Products:
-24dBc at 7dB backoff
Phase Noise:
meets limits 1 & 2 of IESS-308
Temperature:
Operating Temperature: 0º to 50ºC
Storage Temperature: -40º to 70º
Spectral Regrowth
(Single QPSK Signal):
meets -26dBc at 135W output
Noise and Spurious:
-65dBW/4kHz max.
Shock and Vibration:
Equal to Mobile Van or Antenna
Pedestal
Amplifier Gain:
60dB min.
Group Delay:
Linear: .01 nSec/MHz
Parabolic: .05 nSec/MHz (squared)
Ripple: .50 nSec/MHz (peak-to-peak)
Cooling:
Built-in forced air, rear intake and
rear exaust
Gain Variation:
4dB max. Input VSWR: 1.30:1 max. AC Power: 99-255VAC, single-phase
50/60Hz, 1400VA
Gain Slope: .03 dB/MHz max. Output VSWR: 2.00:1 max. Dimensions: 19”W 5.25”H 24”D @ 67lbs
Gain Stability: .25 dB/24-hours Load VSWR: 1.50:1 max.- spec.
2.00:1 max. - continuous
Certification: ETS 300/327
Gain Adjustment: 0-35dB RF Connectors: Input: N-type; rear panel
Output: WR-75; rear panel
Sample Port: N-type; rear panel
   
AM-to-PM Conversion: 6º/dB at rated power Display: Vaccum Fluorescent Display